Struct Decimal

pub struct Decimal { /* private fields */ }

Implementations

impl Decimal

pub const MAX: Self

pub const MIN: Self

pub const ZERO: Self

pub const ONE_HALF: Self

pub const LN2: Self

pub const ONE: Self

pub const TWO: Self

pub const E: Self

pub fn as_repr(self) -> [u64; 8]

pub const fn from_repr(repr: [u64; 8]) -> Self

pub fn is_zero(&self) -> bool

pub fn near_equal(self, other: Self) -> bool

pub fn pow(self, exponent: i32) -> Self

pub fn pow2_int(exponent: u32) -> Option<Self>

Calculates 2^exponent.

pub fn pow2(self) -> Option<Self>

pub fn mul_pow10(self, exponent: i32) -> Option<Self>

pub fn abs_diff(self, other: Self) -> Self

pub fn to_u128_floor(self) -> Option<u128>

pub fn to_u128_ceil(self) -> Option<u128>

pub fn to_f64_lossy(self) -> f64

pub fn to_fixed(&self, precision: usize) -> String

pub fn fractional_part_as_u128_dividend(&self) -> u128

impl Decimal

pub const fn from_u8(value: u8) -> Self

impl Decimal

pub const fn from_u16(value: u16) -> Self

impl Decimal

pub const fn from_u32(value: u32) -> Self

impl Decimal

pub const fn from_u64(value: u64) -> Self

Trait Implementations

impl Add<&Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for U256

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for u128

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for u16

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for u32

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for u64

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<&Decimal> for u8

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: &Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for U256

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for u128

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for u16

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for u32

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for u64

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<Decimal> for u8

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl Add<U256> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: U256) -> Self::Output

Performs the + operation.

impl Add<U256> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: U256) -> Self::Output

Performs the + operation.

impl Add<u128> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u128) -> Self::Output

Performs the + operation.

impl Add<u128> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u128) -> Self::Output

Performs the + operation.

impl Add<u16> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u16) -> Self::Output

Performs the + operation.

impl Add<u16> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u16) -> Self::Output

Performs the + operation.

impl Add<u32> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u32) -> Self::Output

Performs the + operation.

impl Add<u32> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u32) -> Self::Output

Performs the + operation.

impl Add<u64> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u64) -> Self::Output

Performs the + operation.

impl Add<u64> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u64) -> Self::Output

Performs the + operation.

impl Add<u8> for &Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u8) -> Self::Output

Performs the + operation.

impl Add<u8> for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: u8) -> Self::Output

Performs the + operation.

impl Add for Decimal

type Output = Decimal

The resulting type after applying the + operator.

fn add(self, rhs: Decimal) -> Self::Output

Performs the + operation.

impl AddAssign<&Decimal> for Decimal

fn add_assign(&mut self, rhs: &Decimal)

Performs the += operation.

impl AddAssign for Decimal

fn add_assign(&mut self, rhs: Decimal)

Performs the += operation.

impl BorshDeserialize for Decimal

fn deserialize_reader<R: Read>(reader: &mut R) -> Result<Self>

fn deserialize(buf: &mut &[u8]) -> Result<Self, Error>

Deserializes this instance from a given slice of bytes. Updates the buffer to point at the remaining bytes.

fn try_from_slice(v: &[u8]) -> Result<Self, Error>

Deserialize this instance from a slice of bytes.

fn try_from_reader<R>(reader: &mut R) -> Result<Self, Error>

where R: Read,

impl BorshSchema for Decimal

fn add_definitions_recursively( definitions: &mut BTreeMap<Declaration, Definition>, )

Recursively, using DFS, add type definitions required for this type. Type definition partially explains how to serialize/deserialize a type.

fn declaration() -> Declaration

Get the name of the type without brackets.

impl BorshSerialize for Decimal

fn serialize<W: Write>(&self, writer: &mut W) -> Result<()>

impl Clone for Decimal

fn clone(&self) -> Decimal

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Decimal

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Decimal

fn default() -> Self

Returns the “default value” for a type.

impl<'de> Deserialize<'de> for Decimal

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>

where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer.

impl Display for Decimal

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Div<&Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for U256

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for u128

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for u16

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for u32

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for u64

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<&Decimal> for u8

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: &Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for U256

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for u128

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for u16

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for u32

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for u64

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<Decimal> for u8

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl Div<U256> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: U256) -> Self::Output

Performs the / operation.

impl Div<U256> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: U256) -> Self::Output

Performs the / operation.

impl Div<u128> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u128) -> Self::Output

Performs the / operation.

impl Div<u128> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u128) -> Self::Output

Performs the / operation.

impl Div<u16> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u16) -> Self::Output

Performs the / operation.

impl Div<u16> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u16) -> Self::Output

Performs the / operation.

impl Div<u32> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u32) -> Self::Output

Performs the / operation.

impl Div<u32> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u32) -> Self::Output

Performs the / operation.

impl Div<u64> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u64) -> Self::Output

Performs the / operation.

impl Div<u64> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u64) -> Self::Output

Performs the / operation.

impl Div<u8> for &Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u8) -> Self::Output

Performs the / operation.

impl Div<u8> for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: u8) -> Self::Output

Performs the / operation.

impl Div for Decimal

type Output = Decimal

The resulting type after applying the / operator.

fn div(self, rhs: Decimal) -> Self::Output

Performs the / operation.

impl DivAssign<&Decimal> for Decimal

fn div_assign(&mut self, rhs: &Decimal)

Performs the /= operation.

impl DivAssign for Decimal

fn div_assign(&mut self, rhs: Decimal)

Performs the /= operation.

impl<T: AssetClass> From<FungibleAssetAmount<T>> for Decimal

fn from(value: FungibleAssetAmount<T>) -> Self

Converts to this type from the input type.

impl From<U256> for Decimal

fn from(value: U256) -> Self

Converts to this type from the input type.

impl From<u128> for Decimal

fn from(value: u128) -> Self

Converts to this type from the input type.

impl From<u16> for Decimal

fn from(value: u16) -> Self

Converts to this type from the input type.

impl From<u32> for Decimal

fn from(value: u32) -> Self

Converts to this type from the input type.

impl From<u64> for Decimal

fn from(value: u64) -> Self

Converts to this type from the input type.

impl From<u8> for Decimal

fn from(value: u8) -> Self

Converts to this type from the input type.

impl FromStr for Decimal

type Err = DecimalParseError

The associated error which can be returned from parsing.

fn from_str(s: &str) -> Result<Self, Self::Err>

Parses a string s to return a value of this type.

impl JsonSchema for Decimal

fn schema_name() -> String

The name of the generated JSON Schema.

fn json_schema(gen: &mut SchemaGenerator) -> Schema

Generates a JSON Schema for this type.

fn is_referenceable() -> bool

Whether JSON Schemas generated for this type should be re-used where possible using the $ref keyword.

fn schema_id() -> Cow<'static, str>

Returns a string that uniquely identifies the schema produced by this type.

impl Mul<&Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for U256

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for u128

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for u16

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for u32

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for u64

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<&Decimal> for u8

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: &Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for U256

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for u128

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for u16

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for u32

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for u64

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<Decimal> for u8

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl Mul<U256> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: U256) -> Self::Output

Performs the * operation.

impl Mul<U256> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: U256) -> Self::Output

Performs the * operation.

impl Mul<u128> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u128) -> Self::Output

Performs the * operation.

impl Mul<u128> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u128) -> Self::Output

Performs the * operation.

impl Mul<u16> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u16) -> Self::Output

Performs the * operation.

impl Mul<u16> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u16) -> Self::Output

Performs the * operation.

impl Mul<u32> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u32) -> Self::Output

Performs the * operation.

impl Mul<u32> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u32) -> Self::Output

Performs the * operation.

impl Mul<u64> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u64) -> Self::Output

Performs the * operation.

impl Mul<u64> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u64) -> Self::Output

Performs the * operation.

impl Mul<u8> for &Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u8) -> Self::Output

Performs the * operation.

impl Mul<u8> for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: u8) -> Self::Output

Performs the * operation.

impl Mul for Decimal

type Output = Decimal

The resulting type after applying the * operator.

fn mul(self, rhs: Decimal) -> Self::Output

Performs the * operation.

impl MulAssign<&Decimal> for Decimal

fn mul_assign(&mut self, rhs: &Decimal)

Performs the *= operation.

impl MulAssign for Decimal

fn mul_assign(&mut self, rhs: Decimal)

Performs the *= operation.

impl Ord for Decimal

fn cmp(&self, other: &Decimal) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq<U256> for &Decimal

fn eq(&self, other: &U256) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<U256> for Decimal

fn eq(&self, other: &U256) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u128> for &Decimal

fn eq(&self, other: &u128) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u128> for Decimal

fn eq(&self, other: &u128) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u16> for &Decimal

fn eq(&self, other: &u16) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u16> for Decimal

fn eq(&self, other: &u16) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u32> for &Decimal

fn eq(&self, other: &u32) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u32> for Decimal

fn eq(&self, other: &u32) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u64> for &Decimal

fn eq(&self, other: &u64) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u64> for Decimal

fn eq(&self, other: &u64) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u8> for &Decimal

fn eq(&self, other: &u8) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq<u8> for Decimal

fn eq(&self, other: &u8) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialEq for Decimal

fn eq(&self, other: &Decimal) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd<U256> for &Decimal

fn partial_cmp(&self, other: &U256) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<U256> for Decimal

fn partial_cmp(&self, other: &U256) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u128> for &Decimal

fn partial_cmp(&self, other: &u128) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u128> for Decimal

fn partial_cmp(&self, other: &u128) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u16> for &Decimal

fn partial_cmp(&self, other: &u16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u16> for Decimal

fn partial_cmp(&self, other: &u16) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u32> for &Decimal

fn partial_cmp(&self, other: &u32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u32> for Decimal

fn partial_cmp(&self, other: &u32) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u64> for &Decimal

fn partial_cmp(&self, other: &u64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u64> for Decimal

fn partial_cmp(&self, other: &u64) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u8> for &Decimal

fn partial_cmp(&self, other: &u8) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd<u8> for Decimal

fn partial_cmp(&self, other: &u8) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl PartialOrd for Decimal

fn partial_cmp(&self, other: &Decimal) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Serialize for Decimal

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>

where S: Serializer,

Serialize this value into the given Serde serializer.

impl Sub<&Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for U256

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for u128

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for u16

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for u32

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for u64

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<&Decimal> for u8

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: &Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for U256

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for u128

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for u16

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for u32

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for u64

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<Decimal> for u8

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl Sub<U256> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: U256) -> Self::Output

Performs the - operation.

impl Sub<U256> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: U256) -> Self::Output

Performs the - operation.

impl Sub<u128> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u128) -> Self::Output

Performs the - operation.

impl Sub<u128> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u128) -> Self::Output

Performs the - operation.

impl Sub<u16> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u16) -> Self::Output

Performs the - operation.

impl Sub<u16> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u16) -> Self::Output

Performs the - operation.

impl Sub<u32> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u32) -> Self::Output

Performs the - operation.

impl Sub<u32> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u32) -> Self::Output

Performs the - operation.

impl Sub<u64> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u64) -> Self::Output

Performs the - operation.

impl Sub<u64> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u64) -> Self::Output

Performs the - operation.

impl Sub<u8> for &Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u8) -> Self::Output

Performs the - operation.

impl Sub<u8> for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: u8) -> Self::Output

Performs the - operation.

impl Sub for Decimal

type Output = Decimal

The resulting type after applying the - operator.

fn sub(self, rhs: Decimal) -> Self::Output

Performs the - operation.

impl SubAssign<&Decimal> for Decimal

fn sub_assign(&mut self, rhs: &Decimal)

Performs the -= operation.

impl SubAssign for Decimal

fn sub_assign(&mut self, rhs: Decimal)

Performs the -= operation.

impl Copy for Decimal

impl Eq for Decimal

impl StructuralPartialEq for Decimal